Installation Guide

 Tips

This ONT supports wall mounting (two mounting holes on the bottom). The recommended parts are as follows:

Expansion bolt: PA6*26.4mm; inner diameter: φ2.4

Quantity: 2; Diameter: 2.5-4.0mm; head diameter: 5.0-6.5mm.

 Tips

If your ISP provides any parameters for registration, choose Method2. Otherwise, choose Method 1.

 Method 1: Auto registration 

After connecting the ONT, wait until the PON LED indicator lights solid on, then the ONT is registered successfully.

 Method 2: Manual registration 

 1. 

Connect to the ONT.

• Wired device: Connect a LAN port of the ONT to a wired device, such as a computer, using an Ethernet cable.
• Wireless device: Connect your wireless device, such as a smartphone, to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom label.

 2. 

Log in to the web UI by visiting 192.168.1.1 in a web browser.

Default login user name and password are both admin.

 Tips

If the above page does not appear, refer to Q1 in FAQ.

 3. 

Navigate to Admin > GPON Settings to register with the parameters provided by your ISP, and click Apply Changes.

 Tips

The ONT automatically adapts to your fiber access type, and the default mode is GPON. If your access type is EPON, you may configure parameters in Admin > EPON Settings.

When the PON LED indicator lights solid on, the ONT is registered successfully.

 Tips

• PPPoE is used for illustration here. Please change the parameters as required by your ISP.

• Choose a desired mode to configure your internet access:   

Router mode: Configure the internet on the ONT.

Bridge mode (default): Dial- up on a router or computer.

 Router mode 

Step 1: Log in to the web UI

 1. 

Connect to the ONT.

• Wired device: Connect a LAN port of the ONT to a wired device, such as a computer, using an Ethernet cable.
• Wireless device: Connect your wireless device, such as a smartphone, to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom label.

 2. 

Start a web browser and visit 192.168.1.1.

 3. 

Enter the User Name and Password, which are both admin by default.

 4. 

Click Login.

 Tips

If the above page does not appear, refer to Q1 in FAQ.

Step 2: Set up a WAN connection

 1. 

Choose WAN > PON WAN.

 2. 

Tick Enable VLAN, and enter the VLAN ID provided by your ISP.

 3. 

Set Channel Mode to PPPoE.

 4. 

Set Connection Type to INTERNET.

 5. 

Enter the PPPoE UserName and Password provided by your ISP.

 6. 

Set other parameters according to your ISP and your own need.

 7. 

Click Apply Changes.

 8. 

Click OK when Change setting successfully is shown on the page.

Done.

To access the internet:

• Connect your wired device, such as a computer, to a LAN port of the ONT.
• Connect your wireless device, such as a smartphone, to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom label.

 Tips

• If you cannot access the internet after the configuration, refer to Q2 in FAQ.

• If you want to change the Wi-Fi name and password, refer to Q6 in FAQ.

 Tips

When the ONT is set to Bridge mode, you cannot access the internet through the Wi-Fi network or the LAN ports of the ONT.

Option 1: Dial-up on a router

 1. 

Connect a LAN port of the ONT to the WAN port of a router using an Ethernet cable.

 2. 

Connect your computer to a LAN port of the router, or connect your smartphone to its Wi-Fi network.

 3. 

Set up a PPPoE connection on the router as required.

After the settings, you can access the internet through the router.

 

Option 2: Dial-up on a computer (Windows 10)

 1. 

Connect a LAN port of the ONT to a computer using an Ethernet cable.

 2. 

Right-click  on the desktop and choose Network Connections.

 3. 

Choose Dial-up and click Set up a new connection.

 4. 

Click Connect to the Internet and click Next.

 5. 

Click Broadband (PPPoE).

 6. 

Enter the PPPoE User name and Password provided by your ISP and click Connect.

Wait a few seconds until the dial-up succeeds, then you can access the internet on the computer.

 

Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent accidents. The warning and danger items in other documents do not cover all the safety precautions that must be followed. They are only supplementary information, and the installation and maintenance personnel need to understand the basic safety precautions to be taken.

• For wall mounting, the equipment is only suitable for mounting at heights ≤ 2m.
• For desktop mounting, the device must be horizontally mounted for safe use.
• Do not use the device in a place where wireless devices are not allowed.
• Please use the included power adapter.
• Mains plug is used as the disconnect device, and shall remain readily operable.
• The power socket shall be installed near the device and easily accessible.
• Operating environment: Temperature: 0℃ to 45℃; Humidity: (10% - 90%) RH, non-condensing; Storage environment: Temperature: -40℃ to +70℃; Humidity: (5% - 90%) RH, non-condensing.
• Keep the device away from water, fire, high electric field, high magnetic field, and inflammable and explosive items.
• Unplug this device and disconnect all cables during lightning storms or when the device is unused for long periods.
• Do not use the power adapter if its plug or cord is damaged.
• If such phenomena as smoke, abnormal sound or smell appear when you use the device, immediately stop using it and disconnect its power supply, unplug all connected cables, and contact the after-sales service personnel.
• Disassembling or modifying the device or its accessories without authorization voids the warranty, and might cause safety hazards.