Installation Guide

 Tips

This ONT supports wall mounting (two mounting holes on the bottom). The recommended parts are as follows:

Expansion bolt: PA6*26.4 mm; inner diameter: φ2.4

Quantity: 2; diameter: 2.5–4.0 mm; head diameter: 5.0–6.5 mm.

Caution, laser
DO NOT look directly at the PON port when the device is powered on, as well as the terminal of the indoor fiber cord, to prevent any harm to your eyes.

Connect the ONT as shown in the figure. The ONT automatically adapts to the fiber access type. Wait until the PON LED indicator lights solid on, then the ONT is registered successfully.

 Tips

If your ISP provides any parameters for registration, you can use them to manually register the ONT.

Method:

1. Use an Ethernet cable to connect a LAN port of the ONT to a computer, or connect your smartphone to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom label.

2. Enter 192.168.1.1 in a web browser and log in to the web UI of the ONT (default login user name and password are both admin).

3. Navigate to Admin > GPON Settings (or EPON Settings) and enter the parameters provided by ISP.

 Tips

Choose a desired mode to configure your internet access:

• Router mode: Choose this mode if your internet access type is PPPoE or DHCP.

• Bridge mode (default): Choose this mode if your internet access type is PPPoE.   

 Router mode 

 Option 1  Access internet over PPPoE 

Step 1: Log in to the web UI

 1. 

Connect a LAN port of the ONT to a computer using an Ethernet cable, or connect your smartphone to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom label.

 2. 

Start a web browser and visit 192.168.1.1.

 3. 

Enter the User Name and Password (admin for both by default).

 4. 

Click Login.

 Tips

If the above page does not appear, refer to Q1 in FAQ.

Step 2: Set up a WAN connection

 1. 

Choose WAN > PON WAN.

 2. 

Tick Enable VLAN, and enter the VLAN ID provided by your ISP.

 3. 

Set Channel Mode to PPPoE.

 4. 

Set Connection Type to INTERNET.

 5. 

Enter the PPPoE UserName and Password provided by your ISP.

 6. 

Set other parameters according to your ISP and your own need.

 7. 

Click Apply Changes.

 8. 

Click OK when Change setting successfully is shown on the page.

Done.

To access the internet:

• Connect your wired device, such as a computer, to a LAN port of the ONT.
• Connect your wireless device, such as a smartphone, to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom label.

 Tips

• If you cannot access the internet after the configuration, refer to Q2 in FAQ.

• If you want to change the Wi-Fi name and password, refer to Q6 in FAQ.

Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent accidents. The warning and danger items in other documents do not cover all the safety precautions that must be followed. They are only supplementary information, and the installation and maintenance personnel need to understand the basic safety precautions to be taken.

• For wall mounting, the equipment is only suitable for mounting at heights ≤ 2m.
• For desktop mounting, the device must be horizontally mounted for safe use.
• Do not use the device in a place where wireless devices are not allowed.
• Please use the included power adapter.
• Mains plug is used as the disconnect device, and shall remain readily operable.
• The power socket shall be installed near the device and easily accessible.
• Operating environment: Temperature: 0℃ to 45℃; Humidity: (10% - 90%) RH, non-condensing; Storage environment: Temperature: -40℃ to +70℃; Humidity: (5% - 90%) RH, non-condensing.
• Keep the device away from water, fire, high electric field, high magnetic field, and inflammable and explosive items.
• Unplug this device and disconnect all cables during lightning storms or when the device is unused for long periods.
• Do not use the power adapter if its plug or cord is damaged.
• If such phenomena as smoke, abnormal sound or smell appear when you use the device, immediately stop using it and disconnect its power supply, unplug all connected cables, and contact the after-sales service personnel.
• Disassembling or modifying the device or its accessories without authorization voids the warranty, and might cause safety hazards.